Walkera T210 MINI, Operation Manual

Page: 51 / 56

23
5) Do not block or interfere with the vision system in any way, and avoid using it in an environment with too much
dust and water mist, so as not to affect the clarity of the camera. Please do not block the TOF detection light pulse
transceiver sensor in any way.
6) Avoid flying in rainy and foggy weather or in other scenarios with low visibility (visibility below 100 m).
1 Hold the aircraft head vertically upward for more than 6 seconds for the aircraft status indicator to enter the flash,
and then rotate the aircraft for 720° in the horizontal direction, and the aircraft indicator turns off.
2 Put the aircraft flat, then rotate 720° in the horizontal direction, the aircraft indicator light will be on, and then rest
the aircraft in the horizontal position.
The compass calibration method is as follows:
Calibrating the Aircraft Compass
Notice:
1) The WK Fly App on the mobile device indicates that the magnetic compass of the aircraft is seriously interfered,
or circles when hovering, or when the flying straight line deviates from the route, land in time to calibrate the
compass. (The motor must be locked).
2)Please perform calibration in an open place outdoors and away from strong electromagnetic field interference.
Open the aircraft compass calibration
Method 1: When the mobile device, aircraft and remote control are all connected, open the compass calibration
Method 2: When the motor is locked and connected to the remote control, directly place the aircraft nose vertically
upward for more than 6 seconds. The aircraft status indicator flashes quickly to indicate that it has entered the
compass calibration state.
Calib
Start Calibration
If the calibration is unsuccessful, please recalibrate as described above.
The ground
The nose up
The ground
Walkera All Rights Reserved
T210 MINI(WK-V8)Operation guide