English
- 6 -
Remote Control
First remove the battery compartment cover on the underside of the remote control. Insert two size
AAA
batteries. Make sure the (+) and (-) signs match (observe correct polarity). Do not mix old and new batteries.
Replace only with same or equivalent type. Place the cover back on.
While using the remote control, direct it towards the front side of the receiver. If the remote control does not
work or the chosen function does not work, the batteries are most probably exhausted and they should be
replaced as soon as possible. Please use only the leak proof batteries. It is best to remove the batteries from
the remote unit if you will not be using the remote control unit for long time.
Connection to the TV
HDMI Connection (recommended):
For HD video and audio output you can use the HDMI socket if your
TV has an HDMI input. There is an HDMI socket that supports 4 different resolutions on the rear side of the
set-top box. For best video performance please check the supported resolutions of your TV.
Analog A/V Connection:
If you don’t want to use the HDMI connection you can use the analog output of
your set-top box to connect it to your TV. You can transfer audio and video after switching the televisions input
source to the related source option.
35040506
