7. Appendix
7.1 Preparing before installing Wall-Mount on the wall
There are various kinds of Wall-Mount and various ways to install it depending on a manufacturer.
Refer to the instructions of the purchased Wall-Mount to install Wall-Mount properly.
Precaution for installation
- Install your wall-mount on a solid wall perpendicular to the floor.
- When installing to other building materials, please contact your nearest dealer.
- If installed on a ceiling or slanted wall, it may fall and result in severe personal injury.
Wall-Mount Kit specifications (VESA)
We provided the standard dimensions for wall-mount kits as shown in the table below.
Example of installation
Inch
VESA Spec. (A*B)
Standard Screw
Quantity
32~42
400 * 200
M6
4
46~52
400 * 400
600 * 400
M8
4
A
B
A
B
<Case A>
<Case B>
A
B
Notes
- Do not use screws longer than the standard
dimension, as they may cause damage to the inside
of the TV set.
- For wall-mounts that do not comply with the VESA
standard screw specifications, the length of the
screws may differ depending on their specifications.
- Do not use screws that do not comply with the VESA
standard screw specifications.
- Do not use fasten the screws too strongly, this may
damage the product or cause the product to fall,
leading to personal injury.
We are not liable for these kinds of accidents.
- Install Wall-Mount with the torque range of 15kgf
•
cm
or less. Make sure that parts can be damaged if the
torque is out of the specified range.
- Do not install your Wall-mount Kit while your TV is
turned on. It may result in personal injury due to
electric shock.
- In case of installing your TV on the wall, close the
cover on the hole of stand for hiding.
Cover-bottom
Square type: 32 inches
Round type: 42 inches
ENG - 37
WALKER.indd 37
2008-08-26 �� 1:16:52
