Walker WP2213LEDVD, Operating Instructions Manual

Page: 24 / 45

English
- 23 -
• Press MENU button to exit.
Picture Settings Menu Items
Mode : For your viewing requirements, you can set
the related mode option. Picture mode can be set
to one of these options: Cinema , Game , Dynamic
and Natural .
Contrast : Sets the lightness and darkness values
of the screen.
Brightness : Sets the brightness value for the
screen.
Sharpness : Sets the sharpness value for the objects
displayed on the screen.
Colour : Sets the colour value, adjusting the colors.
Power Save Mode : Use “ ” or “ ” button to select
Power Save Mode.
Press “ ” or “ ” button to set Power Save Mode as
On or Off.
See the section, “Environmental Information” in
this manual for further information on Power Save
Mode.
Note : Backlight function will be inactive if Power Save
Mode is set to on.
Backlight (optional) : This setting controls the
backlight level and it can be set to Auto, Maximum,
Minimum, Medium and Eco Mode (optional).
Note: Backlight can not be activate in VGA or
Media Browser mode or while picture mode is set
as Game.
Noise Reduction : If the broadcast signal is weak and
the picture is noisy, use Noise Reduction setting to
reduce the noise amount. Noise Reduction can be set
to one of these options:
Low
,
Medium
,
High
or
Off
.
Advanced Settings:
• Colour Temp
: Sets the desired colour tone.Setting
Cool option gives white colours a slight blue
stress.For normal colours, select
Normal
option.
Setting
Warm
option gives white colours a slight
red stress.
• Picture Zoom
:Sets the picture size to
Auto
,
16:9
,
Subtitle,14:9 , 14:9 Zoom, 4:3 or Cinema.
• HDMI True Black (optional):
While watching from
HDMI source, this feature will be visible in the Picture
Settings menu. You can use this feature to enhance
blackness in the picture. You can set this feature as
“On” for activating HDMI True Black mode.
• Film Mode (optional) : Films are recorded
at a different number of frames per second
t o n o r m a l t e l e v i s i o n p r o g r a m m e s .
Press “ ” or “ ” buttons to select Film mode. Press
“ ” or “ ” buttons to set this feature Auto or Off. Turn
this feature to Auto when you are watching films to
see the fast motion scenes clearly.
• Colour Shift: Adjust the desired colour tone.
Reset : Resets the picture settings to factory default
settings.
While in VGA (PC) mode, some items in Picture menu
will be unavailable. Instead, VGA mode settings will be
added to the Picture Settings while in PC mode.
PC Picture Settings
For adjusting PC picture items, do the following:
Press “ ” or “ ” button to select Picture icon. Picture
menu appears on the screen.
Contrast, Brightness, Colour, Colour Temp and
Picture Zoom settings in this menu are identical
to settings defined in TV picture menu under “Main
Menu System”.
Sound,Settings and Source settings are identical to
the settings explained in main menu system.
PC Position : Select this to display PC position menu
items.
Autoposition : Automatically optimizes the display.
Press OK to optimize.
H Position : This item shifts the image horizontally to
right hand side or left hand side of the screen.
V Position : This item shifts the image vertically
towards the top or bottom of the screen.
Dot Clock
: Dot Clock adjustments correct the
interference that appear as vertical banding in
dot intensive presentations like spreadsheets or
paragraphs or text in smaller fonts.
Phase : Depending on the resolution and scan
frequency that you input to the TV set, you may see
a hazy or noisy picture on the screen. In such a case
you can use this item to get a clear picture by trial
and error method.
Configuring Sound Settings
Sound settings can be configured according to your
personal preferences.