71
Maintenance Instructions
ADJUSTMENTS
Step 3 -
Neutral Function Adjustment
1. With the Forward Speed Control (FSC) in
NEU-
TRAL-PARK,
the lever should be straight up.
Adjust by loosening the jam nuts on the FSC
Rod and turn the rod to attain the straight up
position. Tighten the jam nuts.
Correct FSC Lever NEUTRAL-PARK Position
Adjust Length of
Rod to Position
FSC Lever
FSC Lever Position Adjustment
2. Securely block the tractor up so the drive tires
are off the ground.
3.
Adjust the tracking adjustment nuts at the front
of both control rods so that 2 or 3 threads are
visible, then loosen the jam nuts on the ball
joints at the back of the control rods.
Control Arm
Tracking Adjustment Nuts
Control Rods
Transmission Control Rod and Arm Location
(Front Body Hidden for Clarity)
FWD
REV
Tracking Adjustment Nut
(Adjusts Length of
Control Rod)
Control Rod
Locating/Limit
Stud
Transmission
Control Arm
Maximum Speed
Adjustment Set Screw
Ball Joint
Jam Nut
Tracking Adjustment Components
WARNING
The following adjustments are made with
the engine running. Keep all body parts
and tools away from rotating and hot com-
ponents, and secure all loose clothing.
