Operating Instructions
28
Body Latch
The front portion of the tractor body hinges forward
for maintenance access and is latched down in the
OPERATING
position. To raise the body, move the
latch release backward.
Body
Latch
Body Latch
Hourmeter
The hourmeter, which is located on the right front of
the body, displays
operating time
accumulated
when the PTO is in the
ENGAGED
position.
The hourmeter provides maintenance reminders af-
ter certain hours of operation. The hourmeter screen
will start flashing the reminder one hour prior to the
recommended interval and will continue until one
hour after the recommended interval (two hours).
The hourmeter
does not have a manual reset
function.
Procedure
Interval*
Reminder
Oil Change
(Break-In)**
4-6 Hours
C
H
G
OIL
Lubricate
and Check
Levels
24-26 Hours
LUBE
Oil Change
49-51 Hours***
C
H
G
OIL
*
These intervals reflect the actual time that the
reminder will flash (one hour prior to and one
hour after the recommended interval).
** This reminder is only used one time.
*** In normal operating conditions, oil changes in
100-hour intervals are acceptable. Walker and
the engine manufacturers recommend engine
oil changes every 50 hours in extremely dirty or
dusty conditions or for units with less than 100
hours annual use.
NOTE:
The blinking hour glass on the display
means that the meter is operating properly.
Hourmeter
Summary of Contents for B23i
Page 73: ...69 Operator s Notes...
Page 74: ...70 Operator s Notes...
