Specifications
B23
4
TRANSMISSION (CONTINUED)
Service Brake
Dynamic Braking through Transaxles
Parking Brake
Internal Mechanical Cog Lock for each Transaxle
(Single Lever Control)
Neutral
Transmission Release by Manual Dump Valve
Final Drive
Transaxle Direct to Drive Wheel
Transmission Fluid
Factory Service
20W-50 Multi-Viscosity Motor Oil (Minimum SL Grade Oil)
Transmission Oil Capacity fl oz (L)
77 (2.3)
Transmission Cooling
Cooling Fan Mounted on Drive Pulley
Oil Filter
Hydro-Gear
®
P/N 52114 (Walker P/N 2026-6)
Ground Travel Speed
Forward MPH (km/h)
Reverse MPH (km/h)
0-8 (0-13) Infinitely Variable
0-5 (0-8) Infinitely Variable
BLADE DRIVE
PTO Shaft
Quick Disconnect Sliding Spline Shaft with Two (2) High-Speed
U-Joints
Blade Drive Clutch and Brake
Ogura Electric Clutch with Soft Start Engagement and Mechanical
Brake [Stops Blades within Five (5) Seconds of Disengagement]
TIRE SIZE
Deck Caster Wheel
8 x 3.00-4 Semi-Pneumatic (Standard)
8 x 3.00-4 Pneumatic 4-Ply (Optional)
11 x 4.00-5 Pneumatic 6-Ply (DS52, DS60, DS74 Only)
Drive
18 x 8.50-10 (Pneumatic 4-Ply, Standard, Low-Profile)
20 x 10.0-10 Big Tire Kit
Tailwheel
11 x 4.00-5 Pneumatic 6-Ply
TIRE PRESSURE PSI (KPA)
Deck Caster Wheel*
20 (137)
Drive
15 (103)
Tailwheel
20 (137)
* If equipped with optional pneumatic tires
MOWER DECK
Recommended Cut Width
Side Discharge
36 to 74 in. (91 to 188 cm)
Mulch
36 to 52 in. (91 to 132 cm)
Cutting Height
1.5 to 4 in. (4 to 10 cm) or
1.5 to 4.5 in. (4 to 11.5 cm) (DS52 & DS60 Belt-Driven Decks Only)
Deck Suspension
Independent Torsion-Flex Frame with Caster Wheels and
Counterweight Springs
