ASSEMBLY
OM 0182SB-A
11
3. Figure 5:
Drill five 13/64” (5 mm) dia. holes
in the tractor: two in the forward speed
control arm and three in the body as.
4. Figure 6:
Attach the toggle switch
mounting bracket (item 1) on the forward
speed control arm using two 10—24 x 1/2”
bolts and kept nut. At this time, you need to
connect the green ground wire from the
wiring harness to a bolt of the switch
mounting bracket.
5. Figure 6:
Install the wiring
harness to the tractor body as
shown using three wiring clamps
(item 2), three 10— 24 x 3/8” bolts
and kept nuts.
6.
Attach the toggle switch to the
mounting bracket, placing the
switch terminals toward the front
of the tractor.
7.
Connect the harness red wire to the free
connector of the PTO clutch switch red
wire.
8.
Complete the wiring by connecting the
wiring harness to the toggle switch and to
the actuator motor.
9. Figure 7:
Check wiring diagram and
correct if necessary.
Figure 6
2
1
2
2
Figure 7
Figure 5
