background image

Safety Instructions

6

Pay particular attention to any information labeled
DANGER,  WARNING,  CAUTION,  IMPORTANT,
and NOTE in this manual.

When you see the Safety Alert Symbol ( 

 ),

read, understand, and follow the instructions.  Fail-
ure to comply with safety instructions may result in
personal injury.

The seriousness or degree of importance of each
type of information is defined as follows:

IMPORTANT:  Identifies mechanical information de-
manding special attention, since it deals with the pos-
sibility of damaging a part or parts of the machine.

NOTE: Identifies information worthy of special at-
tention.

Walker Manufacturing cannot predict every poten-
tially dangerous situation.  Therefore, items labeled
as such in this manual do not cover all conceivable
situations.  Any person using procedures, tools, or
control techniques not recommended by Walker
Manufacturing must take full responsibility for safety.

The Walker Tractor and Snowblower attachment
have been designed with many safety features to
protect the operator from personal harm or injury.
However, it is necessary for the operator to use safe
operating procedures at all times.  Failure to follow
safety instructions contained in this manual
may result in personal injury or damage to
equipment or property.

If you have any questions concerning setup, opera-
tion, maintenance, or safety, please contact your
authorized Walker Mower Dealer or call Walker
Manufacturing Company at (970) 221-5614.

BEFORE OPERATING

1.

Read and understand the contents of this

OWNER'S MANUAL

 before operating the

snowblower.  Become thoroughly familiar with
all controls and how to stop the machine and
disengage the controls quickly.  Replacement
Owner's Manuals are available by sending the
Model and Serial Number to:

Walker Manufacturing Company

5925 East Harmony Road

Fort Collins, CO 80528

2.

Never allow children to operate or give rides
on the machine.   
Do not allow adults to oper-
ate without proper instruction.

3.

Do not allow anyone other than the operator on
the machine. 

4.  Keep everyone, especially children and pets, a

safe distance away from the area being cleaned.
Do not blow snow with bystanders in the area.

5.  Do not operate the machine wearing sneakers,

tennis shoes, or similar lightweight footwear.
Wear substantial protective footwear that will
improve footing on slippery surfaces.

6.  The snow can sometimes hide objects that might

clog the chute, or otherwise cause damage.
Clear the area of doormats, sleds, boards, wires
and other debris.

DANGER

An IMMEDIATE hazard that WILL result in
severe personal injury or DEATH, if warn-
ing is ignored and proper safety precau-
tions are not taken.

WARNING

A POTENTIAL hazard that COULD result in
severe personal injury or DEATH, if warn-
ing is ignored and proper safety precau-
tions are not taken.

 

CAUTION

Possible hazards or unsafe practices that
MAY result in MODERATE personal injury
or property damage, or machine damage, if
warning is ignored and proper safety pre-
cautions are not taken.

Summary of Contents for SB36












































Reviews: