800-WMAGNET
4 of 33
2 SAFETY INSTRUCTIONS
2.1 General Safety Rules
Following these simple rules can help to avoid accidents:
•
Never
attempt to operate this control and your magnetic chuck until you read
and understand this operator’s manual.
•
Never
disconnect a magnetic chuck from the control’s DC power source
while it is energized! Electrical arcing will occur and may cause serious injury
or death.
•
Only
qualified personnel shall make adjustments within the control while it is
energized!
•
Never
operate the control and chuck until it has been verified that a proper
electrical ground for the control and Chuck has been established.
•
Never
operate damaged or malfunctioning controls or magnetic chucks.
Remember, proper knowledge and techniques in the use of this equipment are the responsibility of the operator. Be sure to read and
understand the instructions and safety warnings contained in this manual before using your chuck control and magnetic chuck.
If you do not understand everything in this manual contact O.S. Walker for assistance before using the equipment.
CALL 1-800-W-MAGNET
IN THE USA
(In Canada call 905-643-3338; In Europe 31-4973-83835)
Summary of Contents for IMI 100D
