3.
Demount reflector and all power and connecting cables.
4.
Clean the device if necessary.
See
Cleaning
.
5.
Put the device and all demounted elements into the original styrofoam
packing and carry and store them according to the requirements in the
technical specifications. See
Technical Specifications
.
16.
Solve problems
Problem
Possible reason
Remedy
Flash device is switched
on, but has no function
Power cord is not
plugged or plugged
incorrect
Plug in the power cord
correctly
Micro-fuse is defect
Change micro-fuse, see
Change micro-fuse
Flash device has
function, but flash
trigger is not possible
Flash capacitor is defect Contact our service
department
Modeling lamp flickers
Modeling lamp is defect Change modeling lamp,
see
Screw in and out
modeling bulb
17.
Maintenance
17.1.
Continuous inspections
What you should do?
Before every
operation
If necessary
Check all cables and plugs for damages.
In case of damage:
WARNING!
Danger of electric shock
and fire through short-circuit
The device should be repaired by an
electrician immediately.
X
Charge flash capacitor
See
Charge of flash capacitor
X
17.2.
Cleaning
WARNING
Posterior danger of bursting of flash tube
Make sure not to touch the flash tube with bare hands accidentally.
WARNING
Danger of electric shock
Just use the specified cleaning supplies The contact with moisture or
water should be avoided
Disconnect from power supply during cleaning.
26
25
26
24
23
