8
WARNING
Select a tripod of suitable weight and dimensions. See
Technical Specifications
.
Make sure, that the tripod with the mounted device has a tilt and skid resistant stand.
1.
Loose locking knurl.
Mount the device with the holder on the tripod.
Tighten locking knurl.
Open barndoors.
6.2
Connect to power supply
•
Switch off device.
See
Switch the device on and off
.
•
Compare the local power supply with the connected load of the device.
See
Technical specifications
.
If the values differ, please contact
or tel. 49 84 32 / 9489-0.
•
Connect the power cord with the socket on the device and with the power socket.
7.
Operation of the device
7.1
Adjust tilt angle
•
Open tilt lever.
•
Adjust the required tilt angle.
•
Tighten tilt lever.
7.2
Switch the device on and off
•
Switch the device on:
Set On/Off tappet switch on I.
•
The device is ready for operation.
•
If the lamps are switched on:
The lamps light up.
•
Switch off device:
Set On/Off tappet switch on O.
•
If the lamps were switched on:
The lamps go out.
7.3
Switch lamps on and off
You can switch the LED´s on and off on the operation panel due to your requirements.
8.
Transportation and storage
•
Switch off device.
See
Switch device on and off
.
•
Let the device cool down completely.
WARNING!
Danger of burning through hot parts. Let the device cool down completely.
•
Cover the LED with e.g. bubble wrap and close the barndoors.
•
Demount power cord.
