12
7.
Operation of the device
7.1
Adjust tilt angle
1.
Loose fastening screw for tilt lever.
2.
Adjust required tilt angle.
3.
Tighten fastening screw for tilt angle.
7.2
Switch the device and lamp on and off
The lamp can be switched on and off through the tappet switch on the
power cord.
1.
Switch on device and lamp:
Set tappet switch on I.
The lamp lights up.
2.
Switch off device and lamp:
Set On/Off tappet switch on O.
The lamp will go out.
8.
Transportation and storage
1.
Switch off device.
See
Switch on and off of the device
.
2.
Let the device cool down completely.
WARNING!
Danger of burning through hot parts. Let the device cool
down completely.
3.
Screw out the lamp and store it securely.
See
Screw in and out of lamp
.
4.
Demount power cord.
5.
Clean the device if necessary.
See
Cleaning
.
6.
Put the device and all demounted elements in one carton and carry and
store them according to the requirements in the technical
specifications. See
Technical specifications.
5
2.
Important safety notes
WARNING
Risk of eye injury
The optical radiation of the lamp could blind your eyes and lead to
afterimages, if persons and animals look into the lamp directly. This could
lead to injuries. Please avoid persons and animals looking into the flash
directly.
WARNING
Danger of crashing, entrapment and fire through the falling down of the
device
The weight of the device is 1kg.
−
Make sure, that the device is always positioned tilt and skid resistant
and stored securely.
−
Keep out of reach of children and animal. They could overturn the
device.
−
Avoid placing cables, where they can be tripped over. The device
could be overturned.
WARNING
Danger of electric shock, burn hazard
Please note, that the device is still connected with the supply voltage
even if it is switched off. Just after disconnecting the device from the
power supply through pulling out the power cable, the device is actually
de-energized.
−
Switch off your device when it is not in use.
−
Switch off your device before mounting and maintenance and
disconnect from power supply.
−
Protect your device against unintended switching-on.
−
Unplug the power cord, if the flash is not in use for a long time.
WARNING
Danger of electric shock, fire through short-circuit
A short-circuit could be caused through defect cables and through
