10
ADVICE: Just use the following specified cleaning supplies.
9.3
Change batteries
WARNING
Please just use batteries, which comply with the required specifications.
See
Technical Specifications
.
1.
Use a Phillips screwdriver to loose the screw on the bottom side of the
transmitter.
2.
Take off the top side of the housing.
3.
Change the battery. Pay attention to the right polarity.
4.
Screw up the housing again.
10.
Accessories and options
You can find extensive accessories for your device in our webshop.
11.
Disposal and environment protection
Your device should be disposed free of charge at the local disposal points.
Remote Trigger
Cleaning
Housing
Use a microfiber cloth to remove light and
stubborn dirt
Screw for opening the
housing
3
Thank you very much for your confidence. We wish you much pleasure and
success with your new device.
The walimex CY-C Remote Trigger Set consists of one transmitter and one
receiver. It is compatible with all studio flashes, whereby a direct
intervisibility is not necessary.
The main features of your device as follows:
−
compatible with all studio flash devices
−
no direct intervisibility necessary
−
very lightweight
−
Please read these instructions carefully before using your device for
the first time. It includes everything you need to know to avoid
physical injuries and damages.
−
Please pay attention to all safety notes in this instruction manual.
−
Please keep this manual safe. In case of selling or leaving the device
to other persons, please don´t forget to hand this manual over as
well.
