6
repair the device on your own. The device should only be repaired by
electricians.
−
Please follow this instruction manual for maintaining your device.
−
Please trigger the flash head through the test button before starting
any operation or maintenance arrangement.
3.
Unpack and check the device
1.
Please unpack the device carefully.
2.
Please check, if the delivery is complete:
•
1 CY-A 4-Channel Remote Trigger Set
o
1 Receiver
o
1 Transmitter
o
1 Sync Cord
o
1 Adapter Phone Jack 3,5 mm
•
1 Instruction Manual in German and English.
3.
Please check, if the delivery is undamaged.
ADVICE: If the delivery should be incomplete or damaged, please
contact [email protected] or our service hotline with the telephone
49 84 32 / 9489-0.
7
4.
Overview about the parts
A
Power Cord for Studio Flash
B
Receiver
C
Jack for Power Cord Power Supply
D
Sync Cord Camera/Transmitter
E
3,5 mm Adapter Sync Cord
F
Sync Cord
G
Transmitter
5.
Quick-start guide
ADVICE:
The detailed instruction for the following operations can be found in the
respective chapters in this instruction manual.
Keep the sequences of the following operation steps when using the device
for the first time to avoid damages on the device.
•
Connect the receiver with the studio flash and power supply.
•
Adjust the frequency.
•
Mount the transmitter on the camera.
•
Trigger the test button.
6.
Preparation for operation
6.1
Connect the receiver with the studio flash and power supply
1.
Switch off studio flash device.
2.
Insert the sync cord in the jack of the studio flash.
3.
Plug the power cord of the receiver in the jack of the studio flash.
4.
Compare the local power supply with the connected load of the
Remote Trigger.
A
C
D
B
E
F
G
