18
19
NOTE
Precautions when using batteries
Batteries can leak or explode if handled improperly. Observe the following
safety instructions when handling batteries for use in this device:
■ Only use batteries that are mentioned in these operating instructions. Do
not use old and new batteries or different types at the same time.
■ Do not put the batteries in a fire or expose them to direct heat.
■ Do not try to insert batteries the wrong way round.
■ Batteries tend to leak after a full discharge. To avoid damaging the pro
-
duct, make sure to remove the batteries if you are not going to use the
product for a long time or if the batteries are dead.
■ If the batteries‘ liquid comes into contact with skin or clothing, rinse them
off with fresh water immediately.
3. Unpacking and checking the device
1. Carfully unpack the package content.
2. Check whether the scope of delivery is complete:
■
1x Receiver
■
1x Transmitter (only included in the set)
■
1x Sync Cord (only included in the set)
■
1x Adapter Phone Jack 3,5 mm
■
1x Instruction Manual in German and English.
3. Please check whether the scope of delivery is free of damage.
NOTE
If the scope of delivery is incomplete or damaged, please contact
In the course of product improvements, we reserve technical and optical
changes.
4. Overview of components and control elements
Radio receiver
1)
Power cord for studio flash
2)
Radio receiver
3)
Socket for power cord power
connection
4)
Synchro cable
5)
3.5 mm adapter for synchro cable
6)
Camera / transmitter
synchro cable
Radio trigger
7)
Transmitter
8)
Test trigger button
9)
Camera hot shoe
10)
Channel control (also on the receiver)
11)
Synchro cable connection socket
1
2
3
5
6
4
7
8
10
9
11
