Waldorf PC8140G, Installation And Operation Manual

Page: 5 / 25

3
Specifications
Model Numbers Covered in this Specification
PC [1] 8140G GAS PASTA COOKER (Single Tank - 40 Ltr)
NOTE:
[1]: - Back Options;
- - Standard Models.
L - Low Back Models.
General
A commercial heavy duty, gas fired high performance Pasta Cooker designed for pasta cooking
commercial high production output, using LPG (Propane) or Natural Gas. The boiling medium is
contained within a heavy gauge stainless steel tank, heated by one infra red surface burner from
beneath the tank.
This Pasta Cooker features an Over Temperature Safety Cut Out System with Full Flame Failure
Safety Controls.
An open tank design to make cleaning a simple and easy task.
Optional Accessories
This appliance can be fitted with the following optional accessories, (refer to the 'Replacement Parts
List' for details).
• Plinth Kit.
Gas Supply Requirements
- Australia New Zealand Only:
- UK Only:
Appliance Classification
Category:
II
2H3P.
Flue Type: A
1.
NOTE: ( * ) The burner operating pressure is to be measured at the upper test point (Supply
Pressure) on the gas control valve located behind the control panel, this is to be carried
out with the burner operating at the ‘High Flame’ setting. Refer to the ‘Gas Conversion
and Specification’ Section for further details.
Natural Gas LP Gas / (Propane)
Input Rating 46 MJ/hr 47 MJ/hr
(N.H.G.C.) (44,547 Btu/hr)
(44,547 Btu/hr)
Supply Pressure
1.13 - 3.40 kPa 2.75 - 4.50 kPa
(4.5" - 13.5" w.c.) (11" - 18.0" w.c.)
Burner Operating Pressure
0.92 kPa (*) 2.6 kPa (*)
(3.7” w.c.) (10.2" w.c.)
Gas Connection ¾” BSP Male
Natural Gas (G20) Propane (G31)
Nominal Reduced Nominal Reduced
Heat Input (nett) 12.0 kW 5.4 kW 12.5 kW 6.2 kW
Gas Rate 1.27 m
3
/hr 0.42 m
3
/hr 0.97 kg/hr 0.48 kg/hr
Supply Pressure 20 mbar 37 mbar
Burner Operating Pressure 9.5 mbar (*)
Gas Connection
3
/
4
” BSP Male
27.7 mbar (*)