9. Creating Programs
9. Creating Programs
Creating and Editing Programs
●
switch on the MIDI BAY.
Now the unit is in PLAY Mode: the display indicates the
number of the selected program memory location, the
green "Play Mode" LED is lit.
●
using the [Up] and [Down] keys, select the program
memory location on which you want to store your
new program.
The program memory locations are numbered 1
through 99.
●
having selected the desired memory location, change
to the EDIT mode by depressing the MODE key
once. The display temporarily indicates the message
<Ed> to inform you about the operation mode
change, now the red "EDIT Mode" LED is lit instead
of the green one.
Creating MIDI BAY programs is really easy: you just
have to assign a [Source] connector to each
[Destination] connector. This procedure has the
advantage that any [Source] connector (i.e., a signal)
can be assigned to several outputs without any
difficulties. By assigning two or more outputs each to
the same input, you can thus set up the MIDI BAY in
such a way that it acts like several "distributors",
independently of each other.
MIDI BAY Manual
