Waldmann TALK EnOcean, Mounting Instructions

Page: 8 / 16

8
For your safety
ENG
2.2 Mounting the wireless mod-
ule of an ATARO suspended
luminaire
X Remove the cover in the middle of the
luminaire top.
A
Fig. 3: Wireless module in a 2-lamp ATARO
suspended luminaire.
NOTE:
When mounting the wireless
module, ensure correct position of the
antenna, as otherwise the cover can no
longer be mounted correctly. In 2-lamp
luminaires, the wireless module is
mounted such that the side of the wire-
less module with the antenna points
towards the near short side of the lumi-
naire. In 4-lamp luminaires, this side of
the wireless module points towards the
centre of the luminaire.
X Insert the wireless module A into the
unused area of the central support,
see Fig. 3.
X
Connect the wireless module, see chap-
ter "Connection" in the operating instruc-
tions of the wireless module.
X
Mount the cover. In doing so, pass the
antenna of the wireless module through
the hole in the cover.
2.3 Mounting the wireless mod-
ule of a TYCOON suspended
luminaire
X Remove the cover in the middle of the
luminaire top.
A
B
Fig. 4: Bend the half of the metal straps
upwards.
X
Bend each of the two metal straps
A
and
B in the centre through 90° upwards,
see Fig. 4.
A
Fig. 5: Bend metal strap A downwards.
X Bend the complete metal strap A
through 90° downwards, see Fig. 5.