46
Setting the work lighting
ENG
7.4 Deactivating the swarm con-
trol
Fig. 55: Swarm control deactivated.
X
Push the "mode" slide switch to posi-
tion
0
, see Fig. 55, and make sure that
at least one rotary coding switch is not
at position
0
, for example at position
1
.
The function is deactivated. All other
functions such as communication with
external transmitters and receivers
remain active.
8. Setting the work lighting
8.1 Setting the work lighting | Via
the LIGHT ADMIN app
X
Set the work lighting via the LIGHT
ADMIN app
8.2 Setting the work lighting | On
the module
Setting the work lighting of an ATARO,
LAVIGO or LAVIGO VTL luminaire
X
Dim the luminaire until the work area
is illuminated with the required bright-
ness. For more details on this, please
read the instructions for use of the
luminaire.
The set brightness is saved as work
lighting.
Setting the work lighting of a TYCOON
luminaire
X
Dim the luminaire by pressing the upper
key of the operating element of the
luminaire until the work area is illumi-
nated with the desired brightness. For
more details on this, please read the
instructions for use of the luminaire.
The set brightness is saved as work
lighting.
