34
Cleaning
ENG
8. Cleaning
NOTICE
Material damage caused by using
wrong cleaning agents.
Damage to the device.
X
Make sure the cleaning agents are
compatible with the surface.
X
Clean the device with a cloth and a mild
detergent.
9. Repair
NOTICE
Material damage caused by improper
repair.
Damage or destruction of the device.
X
Always have repairs performed
by the manufacturer, by a service
technician authorised by the man-
ufacturer or by a person with com-
parable qualification only.
X
Use only spare parts approved by
the manufacturer.
NOTE:
If a defect occurs in the device, you
can contact our service team:
Service Hotline: +49 (0) 77 20 / 6 01 - 170
Service e-mail: [email protected]
10. Replacing the device
Fig. 8: Dismounting the device.
X
Turn the device with the protective
cover pointing to the mounting surface
and remove the luminaire from the hold-
Fig. 9: Installing the device.
X
Place the new device with the protec-
tive cover pointing to the mounting sur-
face on the holders. Make sure that the
side parts are flush with the holders.
X
Turn the device along the holders by
at least 90°, so that the detent lugs of
the holders snap into the grooves of
the side parts of the device, see Fig. 9.
X
Connect the new device, see chapter 4
