42
Replacing the lamp
ENG
9. Replacing the lamp
WARNING
Danger of death due to electric shock.
X
Disconnect the luminaire from the
power supply.
X
Have the lamp replaced by the manu-
facturer, by a service technician
authorised by the manufacturer or
by a person with comparable quali-
fication only.
NOTE:
If a lamp should break down, you
can contact our Service team:
Service Hotline: +49 (0) 77 20 / 6 01 - 170
Service e-mail: [email protected]
10. Adjusting the light head
If a light head is not aligned horizontally, you
can adjust the inclination of the light head.
WARNING
Danger of death due to electric shock.
X
Disconnect the luminaire from the
power supply.
X
Have it performed by a skilled elec-
trician only.
B
C
Fig. 23: Adjusting the light head
NOTE:
If the adjusting screw is screwed
too far into the luminaire head, it may fall
into the support tube.
X
Unscrew the screw
A
on the support
X
To lift the luminaire head slightly, rotate
the adjusting screw
B
one turn coun-
terclockwise.
X
To lower the luminaire head slightly,
rotate the adjusting screw
B
one turn
clockwise.
X
Check whether the luminaire head is ali-
gned horizontally and repeat the steps
if necessary.
X
Tighten the screw
A
.
