500.0021-A
2
Subject to technical changes
Starting to use your safe
As soon as the safe has been delivered and correctly anchored, you can start operating
the lock and using the safe.
To do so, please keep to the following procedure:
1.
Check that the rotary opening
handle is in the "closed" position. Do
this by applying gentle pressure to
move the rotary opening handle
counterclockwise into the end
position.
2.
Using the lug positioned on top of
the keypad, carefully release the
keypad from the input unit and fold it
downwards.
3.
Connect the 9V ALKALINE block
battery to the cable located in the
housing of the input unit, and insert
the battery into the housing from the
front.
4.
Fold the keypad back down until it
engages in the housing of the input
unit.
Insert the cable above the battery
into the housing.
5.
Enter the factory code (1-2-3-4-5-6)
and turn the rotary opening handle
clockwise into the end position.
6.
Open the door.
7.
Programme the new code as per
section 3.3.
Avoid jamming the cable!
