500.0024-A
6
Subject to technical changes
3.2.
Locking the safe
1.
Close the door while the
rotary opening
handle is in the "open" position
.
2.
Turn the rotary opening handle
counterclockwise into the "closed"
position (lock closes automatically).
Wait for the "Lock closed!"
message on the display.
3.
Gently press the rotary opening handle
clockwise to check whether the lock
–
and therefore the safe
–
are locked.
3.3.
Opening the safe under threat
If the locking system is connected to an alarm installation, a silent alarm (which cannot be
heard at your location) can be sent to the alarm centre when the code to open the safe is
entered in the normal way. To trigger the threat alarm, the value of the
last two digits
of
the opening code must be increased by three. This input sends an alarm and the lock
opens (so as not to arouse suspicion).
Make sure that the threat code does not result in a valid opening code!
Explanation:
Last digits of the opening code:
Addition:
Input:
XXXXXX-96
96 + 3 = 99
XXXXXX99
XXXXXX-97
97 + 3 = 1
00
XXXXXX00
XXXXXX98
98 + 3 = 1
01
XXXXXX01
XXXXXX99
99 + 3 = 1
02
XXXXXX02
XXXXXX00
00 + 3 = 03
XXXXXX03
XXXXXX05
05 + 3 = 08
XXXXXX08
Examples:
Opening code:
Threat code:
192753
39
192753
42
192753
42
192753
45
192753
98
192753
01
