background image

 

500.0030-D

 

13 

Technical alterations reserved

 

5.

 

Guarantee against theft

 

WALDIS provides a guarantee against theft from the secure storage unit for safes starting 
from resistance level 2 to cover the duration stated in the order confirmation, as per 
European standard EN 1143-1. In particularly vulnerable locations, WALDIS may limit this 
guarantee or make it subject to additional measures, e.g. an alarm system. In these cases, 
the alarm system has to have been functional and activated at the time the theft took place 
and the alarm has to have been triggered and relayed. Otherwise, the theft guarantee 
terminates immediately. 
The guarantee against theft means that, in the event of theft of the secure storage box 
anchored by WALDIS at that location, WALDIS is obliged to replace the secure storage 
box concerned, but not to cover damages resulting from the theft, or additional costs such 
as transportation and assembly of the new secure storage box, or disassembly or disposal 
of the old secure storage box. The customer is not entitled to any kind of compensation or 
replacement of the contents of the secure storage box. The guarantee against theft only 
applies to theft at the location where the secure storage box was positioned and anchored 
at least four times in accordance with the current instruction manual either by WALDIS or 
an authorised partner company. If the secure storage box is not positioned, anchored or 
moved by WALDIS or an authorised partner company, the theft guarantee terminates 
immediately. 

The safe’s warranty and certification 

terminate after attempted break-ins, fires and 

authorised interference with the structure.

 

 

Summary of Contents for First 850

















Reviews: