1
Safe lock
1.1. General notes
The lock works with a 6-digit numerical code. Each keystroke is confirmed with a
signal consisting of a tone and a flashing sign.
After entering a valid code, a double signal follows. After an invalid entry, a long
beep.
In case of pauses - longer than 10 sec. - the previous entries are deleted and you
have to start again.
1.1.1. Closed position
= Move to the "OPEN" position. (Turn in the direction of the arrow to open
the safe).
1.1.2. Opening the lock
First turn the opening rotary handle to the closed position. This relieves the load
on the lock bolt.
The factory code is 1-2-3-4-5-6
Enter the code and, after the double signal, turn the locking mechanism handle to
the "OPEN" position within 3 seconds.
1.1.3. Closing the lock
Turn the bolt work handle to the "CLOSE" position as far as it will go. The lock
closes automatically. Turn the bolt work handle to the "OPEN" position to
check
whether it is locked.
