3. Mounting of lance and nozzle
Push the lance into the trigger gun�
When inserted turn it�
Make sure the lance is properly fixed to the gun
�
Attach the nozzles�
When attaching the nozzle the button (A) on the nozzle should come out again� Check
before activating the trigger that the nozzle is properly fixed.
A
1
2
3
4. Water connection
Connecting the water supply pipe
Follow your water supplier’s instructions �
For connection information, see the data plate/technical specifications
Use a reinforced hose (not supplied) with a standard connection (ext� diameter: 16mm/
int� 12mm, maximum length: 25m)�
IMPORTANT! Only use water without any impurities. If there is a risk of sand
particles in the inlet water (i.e. from your own well), an additional filter should
be mounted.
Let the water run through the water hose before connecting it to the machine to prevent
sand and dirt from penetrating the machine�
Note: Check that the filter is fitted in the water inlet pipe and that it is not
clogged up.
Connect the water hose to the water supply by means of the quick connector (inlet water,
max� pressure: 10 bar, max� temperature: 60°C)�
Turn on the water�
21
