modifying a configuration file
The configuration text file contains a string of command lines; each that modifies the
behavior of the WS500 to optimize control of the alternator to match the needs of the
batteries and charging system.
The .txt file shown in Figure 12 is a good example of a typical configuration file. In
most cases, the file will provide all the settings the regulator requires to provide a
safe, effective profile for charging.
On the following several pages, we’ll look at the actual text file for a Lifeline AGM
battery, and consider some of the values that the user may want to alter to best
support his or her specific application. Note that in most cases, the only values
which may need modification are battery capacity, target alternator temperature,
percentage of alternator de-rate, and the duration of the start delay and charge ramp.
Other configuration values should be modified with caution.
note that configuration files are carefully designed, based on
testing and manufacturer charging recommendations. improper
modifications can result in damage to the batteries, regulator
and alternator. do not attempt to modify the configuration file
if you are not familiar with this process. failure to properly follow
guidelines may void your warranty and damage your system.
The configuration file broken down in the next several pages is intended to provide
a generalized look at how the code is laid out. Note that different battery types,
different alternator types, battery capacity, and additional components like battery
BMS units may require command lines not shown in this example.
The Wakespeed Communication and Configuration Guide, which can be downloaded
from the Technical Page at www.wakespeed.com, provides a complete list of
available command lines, which can be used to modify the behavior of the WS500
Alternator Regulator.
If your battery, BMS, or alternator type are not supported by an existing command
line, you may find a configuration file for a similar application and modify it to support
your needs. For additional assistance, contact [email protected].
!
p
a
ge 7
imPortant: the following information is provided to describe the numerous
user-configurable features available in the ws500 regulator. we have highlighted
the four most commonly adjusted values in the example. those values are dis-
played in
red
. for more information about advanced user configurations, please
refer to the wakespeed communication and configuration guide, which can be
downloaded in Pdf format from the technical Page at www.wakespeed com.
