running the new configuration Program
The Configuration folder provides all of the files required to update the regulator’s
firmware, and customize the battery program profile, CAN configuration
for BMS (if used), and alternator configurations.
To begin the configuration process:
1. Double-click the file labeled
update.bat. This will open the
window which will guide you
through the firmware update
and upload of the configuration
parameters for the battery type
selected. In some Windows
environments, there may be a message
indicating tha Windows is not allowing
the batch file to be opened. This can be
overridden by clicking the “More info”
link and clicking on the “Run anyway”
button on the next window.
2. A new window will open on the desktop,
providing step-by-step configuration
instructions. See Figure 9 on the
following page for an example of the
configuration window.
3. Carefully connect the Micro USB
connector to the USB plug on the
regulator’s circuit board.
4. See Figure 7 for the location of the USB
plug and reset button. The Micro USB
Figure 6 — Close-up of contents in the Configuration folder
Figure 7 — Micro USB connector & reset button
Figure 8 — Micro USB cable connected
See instructions for customizing battery
profiles starting on Page 7.
p
a
ge 4
