DeltaFire 500 User’s Guide
311-090001
© 1999 WaiLAN Communications, Inc.
Page 6
SYSTEM MANAGEMENT
Accessing System
Access to the System Management Main Menu can be gained either through a Console Port or LAN Port
(Telnet):
•
CONSOLE PORT
– The console port is located on the Controller Card of the DeltaFire. Console
connection is through an RS-232 DB-9 male cable to the terminal/computer’s serial COM 1 or COM
2
port. Users may choose to use any terminal emulation software (PROCOMM Plus is
recommended).
COM
Port Configuration for direct connection to Console Port:
Terminal Emulation:
VT-100
Speed
:
9600, 14,400, 19,200, 28,800, 38,400, 57,600 or 115,200
Data Bit
:
8
Parity Bit
:
None
Stop Bit
:
1
•
TELNET
– Once the IP Address is assigned to the DeltaFire device, users can telnet to the DeltaFire
device for system configuration. An appropriate IP address for the user’s network must be configured
by a console terminal before the telnet command can be used.
CONFIGURATIONS & MONITORING
Main Menu
After making a connection to the DeltaFire device press <Enter> a few times to see the screen below.
Select the desired function by entering the corresponding number.
Console Management, Version DeltaFire 1.0 Beta (Feb 15 1999)
Copyright (C) 1998-1999, WaiLAN Communications, Inc.
Main Menu
1. System Information
2. Traffic Statistics
3. VLAN Configuration
4. Port Configuration
5. IP Range Table
6. Static Routing Table
7. SNMP Configuration
8. Password Change
9. Reset
0. Exit
Tab : Move to next changable field
Up/down Arrow : Move cursor by one line
Left/right Arrow: Move cursor by one character
Space/enter : Next choice when in selection field
