DeltaFire 500 User’s Guide
311-090001
© 1999 WaiLAN Communications, Inc.
Page 16
TROUBLESHOOTING
If your
DeltaFire
device fails to operate properly, follow the troubleshooting procedure listed in Table 1. If
the
DeltaFire
device is still not working, turn off the power and contact Technical Support (see the section
entitled
Technical Support Information
).
Table 1: Troubleshooting Procedures
SYMPTOM
PROBLEM
SOLUTION
No LED display
AC cord unplugged
Check connections
Green light/all LED steady ON
System Down
Try Reset by unplugging/
plugging the power jack
No Response from LAN port
Possibly wrong 10Base-T
cable being used
-Use straight 10Base-T cable
to hub or switch
-Use crossed 10Base-T cable
to PC or Router
Can’t Telnet/Ping to the
remote AGATE
Possibly an IP address not
assigned to the AGATE yet
Use system Main Menu on
AGATE to assign an IP
address
