Wahuda 50180CC-WHD, User Manual

Page: 9 / 46

9
PRODUCT SAFETY (cont.)
14.
ENSURE that the machine sits firmly before using. If the machine wobbles or is unstable,
correct the problem by attaching to a bench top prior to operation.
15.
This machine is designed to process wood ONLY.
16.
WARNING! NEVER position fingers or thumbs near the cutterhead.
17.
Long pieces of stock should ALWAYS be supported with some type of fixture.
18.
DO NOT operate jointer with dull or damaged blades.
19.
MAKE CERTAIN that the jointer is properly adjusted prior to use.
20.
DO NOT try and remove excessive amounts of wood in one single pass.
21.
INSPECT all stock before beginning operations ensuring that there are no foreign objects
embedded in the wood, loose knots, or knots that may become loose during operation.
22.
WARNING! DO NOT attempt to remove jams until power is disconnected and all moving
parts have come to a complete stop.
23.
MAKE SURE that there is adequate operating space on both the infeed and outfeed sides of
the jointer before operating.
24.
WARNING! DO NOT attempt to joint or plane wood that is less than 10” long, narrower
than ¾”, or less than ½” thick.