Wahlberg Winch 25, User Manual

Page: 23 / 44

220.805.011 23 Date: 2021-12-09
Save changed value
The display shows:
Push to change the top line to:
Where X is an increasing number from 1 to 20.
Then push and hold . The top line of the display counts up to 20 then shows OK .
The value is now saved in the memory.
Adjustable parameters
Menu Description Range Default
MAN SPEED Speed for manual driving 200 – 1,500 1,500
MAN UP/DWN Run the motor manual from the menu MOTOR UP / MOTOR DOWN
DMX ADDR DMX start address 1-506 1
TAC RANGE Tacho range 1-99,999 10,000
RAMP TIME Ramping time from 0 to max speed 0.5 – 10.0 1.0
SPEED MAX Maximum speed 500 – 5,000 3,000
SP MIN UP Minimum speed UP 50 - 1,000 200
SP MIN DWN Minimum speed DWN 50 - 1,000 200
E STOP Enable/disable emergency stop OFF/ON OFF
ADV. MENU Show advanced menu OFF/ON OFF
SLACK DELAY Delay from slack activation to stop 0 – 9999 0
POS OUT Position feedback OFF/ON OFF
UNSAFE MODE CAUTION! Disable all limit switches OFF/ON OFF
NOM. FREQ Power input frequency 50/60 50
REVERSE DIR Reverse direction of up and down OFF/ON OFF
QUICK SLACK Stop quickly when slack activates OFF/ON OFF
PRECISION Tolerance for settling 5 – 100 15
SLS DIST Kilometers moved Since Last Service Not adjustable
SLS TIME Hours moving Since Last Service Not adjustable
SLS ON Hours on Since Last Service Not adjustable
SLS RESET Reset Since Last Service parameters NO/YES NO
TOT DIST Kilometers moved in total Not adjustable
TOT TIME Hours moving in total Not adjustable
TOT ON Hours on in total Not adjustable
FACTORY RST Reset to factory default settings NO/YES NO
MAN SPEED and MAN UP/DWN are used for manual control of the motor.