320.805.004
14
Date: 2022-02-09
Enter the [System.List] by press and hold the [Back] button while pushing the [Jog Dial] button.
Sub menu
Parameter
Setting
Note
Management
BACKLIGHT
Always Off
For maximum battery life set the backlight
off and turn it on in low light situations.
UI FEEDBACK
Off
To avoid the beep sound, like in theatres
or similar locations.
Mode
STICK
MODE 2
Default.
MDL Type
TYPE
ACRO
Default.
WING
DELTA(ELEVON)
2AILE
Control setting.
Note: Make sure to select the correct
2AILE mode called DELTA(ELEVON)
shown in the settings.
Adjusting the trims
As a starting point the right gimbal indicators in the display, see Figure 4 should both be set in the
centre position by using the right gimbal trim T1 and T2, see Figure 2.
Figure 4: Flash 7 Remote Display (Flash 8)
If the platform is still moving when the right gimbal (Joystick) is centred, you will need to correct
the offset by first adjusting the T2 until only one of the drive wheels are moving, and then T1 until
both drive wheels are in a static position. For easier identification the drive wheels may be lifted
from the floor during this procedure.
Trim centered
