289.805.003
8
Date: 2018-11-28
Area of use
For indoor use only!
WARNING! To reduce the risk of electric shock or injury: use indoors only
WARNING! To reduce the risk of electric shock, do not expose to rain: store indoors!
The Mini Roll Down is intended for indoor use only. It is designed for lifting and lowering material
at the weight and speed stated in "Technical Data". Any other use of the Mini Roll Down may result
in a risk of injury of persons or equipment damage.
Exceeding the load rating may cause failure of the equipment.
Do not modify the Mini Roll Down. For any modification of your Mini Roll Down, contact Wahlberg.
It is the customers' responsibility that any local restrictions concerning the use of the Mini Roll
Down are fulfilled.
Using for the first time
Important! The Mini Roll Down must be protected from environmental factors such as physical
shocks and vibration during transportation and storage.
WARNING
! Read “Safety Information” on page
2 before installing, powering, operating, or
servicing the Mini Roll Down. Before applying power to the Mini Roll Down:
−
Check the Wahlberg Motion Design website at
documentation and technical information about the Mini Roll Down. Wahlberg user manual
revisions are identified by the revision number in the bottom of each page.
−
Carefully review the “Safety Instructions” on page
−
Check that the local AC mains power source is within the Mini Roll Down power voltage and
frequency ranges.
−
See “Power cables and power plug” on page
2. Install a Neutrik powerCON TRUE1 NAC3FX-W
power input connector on a suitable power cable. If using the power from a mains power outlet,
install a suitable power plug on the power cable.
Transport
Important! The Mini Roll Down must be protected from environmental factors such as physical
shocks and vibration during transportation.
Use only the original packaging, flight case, or pallet frame for protecting the product during
transport. Contact Wahlberg for enquiries regarding flight cases or pallet frames.
