Wahl ZA584, Instructions Manual

Page: 10 / 16

10
HOT AIR STYLER
CARE AND CLEANING
Always unplug your hot air styler and allow it to cool down before
cleaning. Do not immerse in water or liquids. Use a slightly damp
cloth to clean the unit handle of your hot air styler, and dry thoroughly
with a clean soft cloth.
The attachments may be washed in warm water.
MAKE SURE THEY ARE COMPLETELY DRY BEFORE PUT-
TING BACK ON STYLER
IMPORTANT: Do not use harsh abrasive cleaners.
WIRING
WARNING: If the supply cord is damaged it must be replaced
by the manufacturers service agent or a similarly qualified
person in order to avoid a hazard.
The wires in the mains lead of this hot air styler are coloured in
accordance to the following code:
Blue Neutral (N) Brown Live (L)
This appliance is fitted with a 3 pin BS Approved BS1363/A plug
which has a 13amp fuse fitted. If the plug supplied is not suitable for
your socket or becomes damaged, it should be cut off and disposed
of, and a suitable plug fitted as detailed below.
As the colours of the wires in the mains lead of this styler may not
correspond with the colour markings identifying the terminals in
your plug, proceed as follows
The wire which is coloured BLUE must be connected to the terminal
in the plug which is marked with the letter ‘N’ or coloured BLACK or
BLUE.
The wire which is coloured BROWN must be connected to the