Wahl ST2200, User Manual

Page: 14 / 34

ST2200 Soldering Iron Tester User Manual
Page 14 of 34
Sensor repair kits are available for customers who wish to rebuild their own
sensors with factory supplied parts. Each kit contains a replacement sensor band,
screws, plugs and instructions for rebuilding your sensor. The following kits are
available.
WST-02KIT
WST-02BKIT
WST-03KIT
WST-02RT -
Repair Tool Kit, includes holding fixture, removal tool and
screwdriver.
5.2 Probes
Many optional probes are available for use with the ST2200. We suggest the
following probes as possible solutions to your measurement task.
TC801P - Solder Pot probe for immersion measurements of solder pots or wave
solder baths. Will sense temperature to 1600
°
F, mV or resistance.
TC803 - Surface probe with low-mass. 0.032" diameter tip for measuring pc
board surfaces or component temperatures.
TC305 - Miniature Air probe for ambient air temperature or checking hot air
guns.
Please contact Wahl or visit our website for other available probes.
5.3 Carrying Case
12423-01
is a soft carrying case which will hold the ST2200, spare sensors, spare
probes and adapters. Provides excellent dust protection for your unit when not in
use.
6.0 MAINTENANCE