5
10. Attach blade assembly (1) to clipper.
CLIPPER USE AND MAINTENANCE
1. Once the unit is initially charged, for 16 hours, it will take
12 -15 hours to charge completely discharged batteries.
2. A fully charged appliance will deliver a minimum of 45
minutes of continuous trimming.
3. When the appliance is not in use, it should be connected to
the transformer to assure maximum power whenever it is
used. The transformer is designed to continuously charge
the battery, without over charging.
4. It is normal for the unit to become somewhat warm during
normal use.
5. Avoid pushing the blades into the skin, taking extra
care around sensitive areas or areas where folds of skin
are present. The large flat surface of the blade should be
parallel to the skin surface. Do not allow the sharp blade
tips to go into the skin as this will cause injury.
6. After cutting hair, clean the blades and oil before storing
the unit away. Place a small drop of Wahl Clipper Oil only
on the ends of the blades while the clipper is running.
7. To clean the unit, use either a clean, dry or dampened
cloth. DO NOT USE benzene or thinner to clean the unit.
8. Do not store the appliance in a wet or moist environment.
9. To prolong blade life, do not use the appliance on dirty or
wet coats.
10. Do not touch any of the internal mechanisms. If the unit
should need repair, do not repair it yourself. Return it to
Wahl UK Ltd.
11. Keep the cord untwisted and unobstructed. When stored,
the cord should be coiled and the unit placed in a dry
place, away from children.
12. Use only the power source specified on the charger
transformer.
13. Be careful not to drop the appliance or to damage or break
any teeth on the blades.
14. Always replace the blade guard when the clipper is not in
use.
15. Feed the appliance through the hair only as it will cut.
Feeding too fast, wedges the hair clippings between the
blades, keeping them from cutting properly. DO NOT CUT
WET HAIR.
W a h l a n i m a l g r o o m i n g
Where the world goes to look good.
