DESCRIPTION OF PARTS
A – Horse Clipper
B – Blade Set
C – Blade Set Release Button
D – On/Off Switch (2-Speed)
E – Air Filter
F – Hanging Loop
G – Mains Cable
H – Cleaning Brush
I – Oil for Blade Set
OPERATING INSTRUCTIONS
1. Ensure the clipper is switched off before connecting to the mains.
2. Connect the clipper to the mains. Wahl recommend the use of a circuit breaker when
using this clipper with horses.
3. Attach the blade onto the clipper following the instructions in this booklet
4. Ensure the blade is oiled before switching the clipper on.
5. Use the ‘ I / II / off ‘ button at the base of the clipper to switch on the device (Fig. 1.)
6. Speed I should be used for precision clipping around the face and legs etc.
7. Speed II for use on the main body and areas of thicker coat.
8. When clipping we recommend the blades are cleaned and re-oiled at regular intervals.
9. Never use a blade that is damaged in any way as this may cause injury.
10. Always switch the appliance off and disconnect from the power supply when you have
finished using it.
9. ARTIKO
Summary of Contents for HorseLine AVALON
Page 1: ......