1887-1070 00 - 07-2021
14
E N G L I S H
de
en
fr
it
es
pt
nl
da
sv
no
fi
tr
pl
cs
sk
hr
hu
sl
ro
bg
ru
uk
et
lv
lt
el
ar
1887-1070 00 - 07-2021
Changing the blade set
Caution! Injuries to hands or fingers due to sharp-
edged blade set.
1. Switch the appliance off using the on/off switch (Fig. 2a).
2. Take the comb attachment off (Fig. 3b).
3. Carefully push the blade set at the front on the top blade
backwards with your thumbs in the direction of the arrow
(Fig. 7 - 1). Use a cloth or similar if necessary.
4. Take the blade set off (Fig. 7 - 2) and replace it.
5. Hook the new blade set into the housing (Fig. 7 - 7a), swing it up
and press it onto the housing until it you hear it click into position
(Fig. 7 - 7b).
Problem solving
Blade set is cutting badly or pulling hair out
Cause: Blade set is dirty or worn out.
f
Clean and oil the blade set (Fig. 7). If this does not resolve the
problem, replace the blade set (Fig. 7).
Skin injury
Cause: Too much pressure on the skin.
f
Reduce pressure when cutting close to skin.
Cause: Damaged blade set.
f
Check whether the blade edges were damaged during use and
replace the blade set if necessary.
Battery operating time is too short
Cause: A blade set that is dirty and has not been oiled can reduce the
available battery operating time substantially!
f
Carefully clean and oil the blade set (Fig. 7). If the blade set is clean
and oiled and the battery operating time is still far too short, it is
likely that the battery are nearing the end of their life.
Cause: Charge status indicator is imprecise.
f
Fully discharge the appliance before fully recharging it in one
uninterrupted charging process.
Battery charge status indicator does not blink during charging
Cause: Appliance has not been correctly placed on the charging stand.
f
Ensure that the appliance has been correctly placed on the
charging stand.
Cause: Appliance socket is dirty.
f
Clean the appliance socket carefully using a brush or similar!
Cause: Charging stand socket is dirty.
f
Clean the charging stand socket carefully using a brush or similar!
Cause: No power supply.
f
Ensure that the appliance plug is connected properly to the
appliance or to the charging stand.
f
Ensure that the switch mode power supply is connected correctly
to the socket.
f
Check the mains cable and the plugs for any damage.
Battery charge status indicator is blinking red
Cause: Motor blockade
f
Clean and oil the blade set (Fig. 7).
f
Clean the housing opening (Fig. 7).
Caution! Damage and risk of injury due to
unauthorised repairs, modifications or wrong
accessories.
In the event that this information does not help you resolve
your problem, please contact our service centre.
f
Never try to repair the appliance yourself!
f
Do not modify the appliance.
f
Always only use original accessories.
Disposal
Caution! Environmental damage in the event of
incorrect disposal.
f
Discharge batteries before disposal!
f
Correct disposal will ensure environmental protection
and prevent any potentially harmful impact on people
and the environment.
Adhere to the relevant legal requirements when disposing of the
appliance.
Information on the disposal of electric and electronic appliances
in the European Union:
Within the European Community, national regulations are
specified for the disposal of electrical appliances, based on
EU Waste Electrical and Electronic Equipment Directive
2012/19/EC (WEEE). In accordance with this, the appliance
can no longer be disposed of with the local or domestic
waste.
The appliance will be accepted free of charge by local collection points
or recycling centres.
The packaging for this product is made from recyclable materials.
Dispose of this in an environmentally friendly manner by recycling it.
Summary of Contents for 1887
Page 2: ...1 A B F www downloads wahlgmbh com C E P Q D G H I J K L M N O ...
Page 3: ...2 3 4 5 6 ...
Page 4: ...7 ...
