16
DE
GB
Incorrect usage of this equipment (e.g. garden hose), or usage
of a tap that is not meant for low pressure installations may
cause pressure build-up in the device that might lead to dam-
age and thereby void the warranty!
Connection to the electricity supply
The device must be filled with water (see above). Only then
may the appliance be connected to the electricity supply
(insert the plug in the wall socket).
Connection of the device to the power supply network must
take place in accordance with electric installation standards and
as specified by local laws and regulations.
The device must be directly connected to the power supply network (230V) via
an electrical cable and plug.
Avoid danger from damaged power supply cables. In the event of damage, the
device must be replaced by the manufacturer or its customer service department,
or by an equivalently-qualified person.
Ensure that the addition of this boiler will not overload the fuse protection in your
mains.
Internal modifications to the product may cause problems if
this work is not carried out by authorized and qualified tech-
nical staff. The warranty only applies if the product has not
been modified in any way, i.e. subject to it being in unchanged
condition.
In order to avoid creating an unsafe situation by inappropriate
resetting of the maximum temperature safety device, this unit
may not be powered via an external switching device (a time
switch for example) or connected to a circuit, which is regu-
larly switched on and off by the power supply company.
Drawing A. Installation as oversink model
The device must be installed as shown in the installation drawing (A) for undersink
model on the first page of this manual.
