16
DE
GB NL FR
Make sure the pressure of your water supply system supersedes the 0,5bar (0,05MPa).
The electronically-regulated continuous-flow water heater with automatic performance adjust-
ment keeps the outflow temperature constant. This takes place irrespective of the feed tem-
perature, up to the performance limit. The hot water outflow temperature is infinitely variable.
User instructions:
• The appliance shall have a control panel
• with a display that is able to continuously monitor the level you have set
• there are also push-buttons to switch the appliance on and off, and the
arrows can be used to increase or decrease the temperature levels:
Temperature and flow rate
Flow rate (Δt)
Rating power
2.5 L/min
3 L/min
3.5 L/min
10 kW
+56 °C
+47 °C
+40 °C
Note: Parameters in the above diagram are drawn under the following condition:
Voltage Supply: 230V /50Hz
4. MAintenAnce
Maintenance
Professional maintenance may only be carried out by duly authorised
technical staff.
If faulty, never try to repair the hot water device yourself. Please con-
tact the nearest service specialist or the party that supplied the appliance
originally.
Care
The enclosure can simply be cleaned with a damp cloth. Do not use aggressive cleaners or
cleaners with a scouring effect!
Prolonged shutdown
Do not use heated water as drinking water.
After prolonged shutdown of the device for example due holiday, the device should be fully
heated up to the maximum temperature (tap at minimum flow) before re-using. It is recom-
mended to flush the pipes for one minute.
Cleaning the filter
Check the filter which is incorporated in the cold water inlet of the device (blue) regularly and
keep it free from debris and dirt. This can be obtained by separating the device from the tap.
Make sure you have switched off the main power supply and the main water supply.
Summary of Contents for 42320092
Page 35: ...35 DE GB NL FR...
Page 36: ...WB V1 2020 04 www wahlbach com...
