Wahl Bach 42320092, User Manual

Page: 13 / 36

13
DE GB NL FR
Connection to the water supply
Frost
The device should be installed in a vertical position in a room protected
from frost and in the proximity of the water connections. In case the
room cannot be protected against frost, the device should not be in-
stalled in this room. Should the device be installed in such a room, the
device should be emptied before the frost danger will occur.
The use of a low-pressure tap is recommended.
If the mains water supply pressure exceeds 5 bars, a pressure restrictor
must be fitted in the feed pipe.
Incorrect usage of this equipment (e.g. garden hose), or usage of a tap
that is not meant for low pressure installations may cause pressure build-
up in the device that might lead to damage and thereby void the warranty!
Blue = cold water entry side (for filling)
Red = hot water exit side (hot water demand)
This system allows water to be drawn from a single discharge point. Never use a shut-off valve
in the appliance’s outlet.
The water connections are marked red and blue. In case a low-pressure is being used, follow
the instructions of the manual enclosed with the low-pressure tap.
Connection to the electricity supply
The device must be filled with water (see above). Only then may the ap-
pliance be connected to the electricity supply (insert the plug in the wall
socket).
Connection of the device to the power supply network must take place
in accordance with electric installation standards and as specified by local
laws and regulations.
Avoid danger from damaged power supply cables. In the event of damage, the device must be
replaced by the manufacturer or its customer service department, or by an equivalently-qual-
ified person.
Internal modifications to the product may cause problems if this work is
not carried out by authorized and qualified technical staff. The warranty
only applies if the product has not been modified in any way, i.e. subject
to it being in unchanged condition.