![background image](http://html.mh-extra.com/html/wago/wago-perspecto-762-series/wago-perspecto-762-series_manual_868383041.webp)
WAGO PERSPECTO® 762
Commissioning 41
762-3057/000-001 CP 57 QVGA TV
Manual
Version 1.2.1
6.3.8
“Backup/Restore” Tab
You can save and restore the device configuration and project data, for example,
on a memory card.
Doing so allows you to restore the data to the new device when replacing a
defective device without having to redo all the settings.
What data and files should be saved is defined by the
backup_restore.cfg
file.
The file is stored on the device via the path
\Flashdisk\SysExtras\Tools\
backup_restore.cfg
The file is divided into three sections.
[REGISTRY]
"\Memory Stick\wago\backup\registry.reg"
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\BackLight];MaxIntensity
The section devices the registry entries to be saved. The path indicates where
the registry entries shall be saved.
The registry entries to be saved are listed there.
[SRAM]
;Destination path; filename or automatically sram.bin
"\Memory Stick\wago\backup\sram"
The path indicates where the SRAM content shall be saved.
[FILES]
default.*;"\FlashDisk\PLCWinCE\";"\Memory Stick\wago\backup\FlashDisk\
ElaDesign\"
The section devices the files on the device to be saved.
•
default.*
; specified the file that should be saved. Wildcards such as *.*
and.* are permitted.
•
"\FlashDisk\PLCWinCE\";
defines the path of the file to be saved.
•
"\Memory Stick\wago\backup\FlashDisk\PLCWinCE\"
defines the path
where the file should be saved.