750 XTR Series
System Features
System manual | Version: 2.0.0
19
3.1.4.2 Marking
The marking on the products includes the terminal allocation, the serial number and infor-
mation on approvals.
Figure 7: Example Marking of XTR I/O Module
Table 3: Explanation of the Marking Example
No.
Content
Description
1
WAGO logo and address
WAGO GmbH & Co. KG
2
Product information
Item number and product description; conductor
cross-section if applicable
3
Terminal allocation
For more information on connections, see the re-
spective
&
Product Manual
.
4
“Ex” registration icon
The product meets the classified requirements ac-
cording to ATEX for operation in hazardous areas.
For more information on the topic of Approvals, see
the respective
&
Product Manual
.
5
CE mark
With the CE mark, WAGO declares that the product
meets the applicable requirements as set out in
Community harmonization legislation per EC Regu-
lation 765/2008, which allows the product to carry
this mark.
6
“ESD” mark
Note:
Avoid electrostatic discharge!
The products are equipped with electronic compo-
nents that may be destroyed by electrostatic dis-
charge when touched. Please following the safety
precautions to prevent electrostatic discharge per
DIN EN 61340-5-1/-3.
7
“KC” registration icon
This approval mark indicates compliance with Ko-
rean product safety requirements for electrical and
electronic devices and components.
8
“CCC” mark
With the CCC (China Compulsory Certification)
mark, WAGO declares that the product meets the
applicable requirements according to standards valid
for the Chinese market.
