WAGO I/O System 750
Functions
75
750-8210/040-000 PFC200; G2; 4ETH; XTR
Manual
Version 1.7.0, valid from FW Version 04.01.10(23)
5.2.2
Data Backup
The controller has a backup function and a restore function.
In the WBM, the required settings can be made in the “Configuration” tab on the
“Package Server” > “Firmware Backup” or “Firmware Restore” pages and the
functions can be executed.
Settings can a
lso be made in the CBM menu “Package Server” > “Firmware
Backup” or “Firmware Restore”.
The storage medium (internal memory or SD card) and, if applicable, the storage
location on the network can be set.
The data to be backed up and restored can also be selected:
•
the CODESYS project (“PLC Runtime project,” boot project)
•
the device settings (“Settings”)
•
the controller operating system and the root file system
(“System”)
•
all of the above (“All,” only visible if not saved on the network)
Note the firmware version!
Restoring the controller operating system (“System” selection) is only permissible
and possible if the firmware versions at the backup and restore times are
identical.
If necessary, skip restoring the controller operating system, or match the
firmware version of the controller to the firmware version of the backup time
beforehand.
5.2.2.1
Backup Function
The backup function enables the data of the internal memory and device settings
to be saved on the memory card during operation.
The backup function can be called up the WBM page “Firmware Backup” in the
“Configuration” tab, selection “Package Server” > “Firmware Backup” or in the
CBM menu “Package Server” > “Firmware Backup”.
The network or the inserted memory card can be selected as the target medium.
The files of the internal drive are stored on the target medium in the directory
media/sd/copy and in the corresponding subdirectories.
The information that is not present as files on the controller is stored in XML
format in the directory media/sd/settings/.
If the memory card is selected as the target medium, the LED above the memory
card slot flashes yellow during the save operation.
