22
Quickstart Description
WAGO-I/O-SYSTEM 750
750-880 ETHERNET Programmable Fieldbus
Quickstart Reference
Version 1.0.0
3.2.3
Starting Up the ETHERNET Network
This section provides you with a step-by-step sample procedure for starting up the
ETHERNET network.
You must perform three steps to start up the network:
•
Determine the IP address of your PC and change it if required
•
Assign an IP address to the fieldbus controller
•
Test the ETHERNET link
The description of these individual steps can be found in the corresponding
following sections.
Sample description!
This description is just an example. It only describes the procedure for local
startup of a single fieldbus controller using a non-networked computer running
Windows.
