852-1328
Configuration in the WBM
Product manual | Version: 1.2.0
61
Industrial Managed Switch
10.6 Security
10.6.1 Static SAK
Figure WBM Page, “Security” – “Static SAK” Tab shows the “Static Secure Association
Key” (SAK) settings tab. Please note that WAGO 852-1328 supports the MACsec proto-
col on ports 7 and 8. To enable secure association mode on industrial managed switch’s
port(s), first select one of the two ports from the dropdown list under the Ports. Then, en-
ter the Secure Channel Identifier (SCI) with a 16-digit hexadecimal number (i.e., 0,1,2,
…,a,b,c,d,e,f) and enter the Secure Association Key (SAK) with a 32-digit hexadecimal
number. Finally, click on the
[Submit]
button to update the setting to one of the ports in
the Static SAK Status table in the lower part.
Figure 45: WBM Page, “Security” – “Static SAK” Tab
The selected port(s) will use the given static SAK as the secure key to secure all the traf-
fic. If any two switches have the same SCI and SAK, they can securely communicate. If
there is any non-secured traffic that uses incorrect SCI and SAK, the traffic will be
dropped by the ingress port of the switch. The description of the static SAK setting fields
are summarized in Table “WBM Page, “Security” – “Static SAK” Tab”.
To disable the Static SAK setting for any of the port(s), simply select the desired port(s)
from the dropdown list and uncheck the Enabled box. Then click on the
[Submit]
button.
This will update the status of the setting in the Static SAK Status table in the lower part of
the Figure “WBM Page, “Security” – “Static SAK” Tab”.
Table 33: WBM Page, “Security” – “Static SAK” Tab
Parameters
Factory Default
Description
Ports
Option
Select specific port form the dropdown list to be configured.
