WAGO ETHERNET Accessories 852
Assembly
21
852-101 5-Port 100BASE-TX Industrial Switch
Manual
Version 1.0.2
Pos: 13.1 /Alle Serien (Allgemeine Module)/Überschriften für alle Serien/Montieren - Überschrift 1 @ 3\mod_1225446744750_21.doc @ 24900 @ 1 @ 1
4 Assembly
Pos: 13.2 /Serie 852 (Ethernet-Zubehör)/Montieren/Montageort 852-101, 102 @ 3\mod_1227782803203_21.doc @ 25309 @ 1 @ 1
5 Installation
The location selected to install the Industrial Switch may greatly affect its
performance. When selecting a site, we recommend considering the following
rules:
•
Install the Industrial Switch at an appropriate place. See in chapter
“Technical Data” for the acceptable temperature and humidity operating
ranges.
•
Fix the provided brackets at the back of the Industrial Switch to a DIN rail
to protect the switch from falling.
Pos: 13.3 /Serie 852 (Ethernet-Zubehör)/Montieren/Montieren auf Tragschiene @ 3\mod_1222422141203_21.doc @ 22278 @ 2 @ 1
5.1
DIN Rail Mounting
The aluminum DIN Rail attachment plate should already be affixed to the back
panel of the Industrial Switch. If you need to attach the DIN Rail plate, assure that
the stiff metal spring is situated towards the top. Attaching the Industrial Switch to
the DIN rail is easy, just align, and attach the top rail, then press down and snap
forward the Industrial Switch to snap in the bottom rail, as shown in the figures
below.
Figure 8: DIN Rail Mounting
The setup of the Industrial Switch can be performed using the following steps:
•
The surface must support at least 1.5 kg for the Industrial Switch.
•
Visually inspect the DC power jack and make sure that it is fully secured to
the power adapter.
•
Make sure that there is proper heat dissipation from and adequate ventilation
around the Industrial Switch. Do not place heavy objects on the Industrial
Switch.
