20
Hardware Description
WAGO ETHERNET Accessories 852
852-101 5-Port 100BASE-TX Industrial Switch
Manual
Version 1.0.2
Pos: 11.10 /Serie 852 (Ethernet-Zubehör)/Gerätebeschreibung/Anschlusselemente @ 3\mod_1227698479625_21.doc @ 25299 @ 2 @ 1
3.5 Connection
elements
Pos: 11.11 /Serie 852 (Ethernet-Zubehör)/Gerätebeschreibung/Spannungsversorgung @ 3\mod_1221745874421_21.doc @ 21930 @ 3 @ 1
3.5.1
Power Input (PWR/RPS)
The female connector can easily be connected to the 6-pole male connector
located on the top of the switch.
The male connector shows the following pin assignment:
Table 6: Power Input (PWR/RPS)
Name
Designation
+ PWR Primary
DC
input
- PWR Primary
DC
input
+ RPS
Redundant
DC
input
- RPS
Redundant
DC
input
ALM
Contact for external alarm
Figure 7: Power Input
ALM
Contact for external alarm
Warning of damage to equipment by electrostatic discharge
DC Powered Switch: Power is supplied through an external DC power source.
Check the technical specification section for information about the DC power
input voltage. Since the switch does not include a power switch, plugging its
power adapter into a power outlet will immediately power it on.
Pos: 12 /Dokumentation allgemein/Gliederungselemente/---Seitenwechsel--- @ 3\mod_1221108045078_0.doc @ 21810 @ @ 1
